Second hand processing center North Big Kuma Mar-630H horizontal processing center

Sold second-hand Beiyi Okuma mar-630h horizontal processing center, Beijing Okuma OEM, 90% new equipment, less use according to the installation, X-axis full travel 4 seconds, with central water, tool magazine 40, b.50. In December 2010, the machine tool was started for 4900 hours. The parameters of xyz.1000800800 configuration are as follows: processing range mm: 1000 × 800 × 810 operating surface size mm: 630 × 630 maximum bearing mass kg: 1200 maximum processing size mm: ￠ 1, 000 × 900 X-axis mm: 1000 Y-axis mm: 800 z-axis mm: 810 distance from the top of the pallet to the spindle center mm: 50-850 distance from the center of the pallet to the end face of the spindle mm: 200-1010 spindle speed r / min: 50-5000 [op.50-12000] spindle vertebral hole: nt.50 spindle speed: stepless spindle bearing inner diameter mm: Φ 100 cutting feed rate mm / min: 1-40000 rapid feed rate mm / min: 40000 Spindle motor kw: 20 / 15 (10 minutes / continuous) table indexing motor kw: 2.8 (630) feed shaft motor kw: X: 4.6 Y: 5.2 Z: 4.6 tool selection method: random rivet type: MAS 2 type tool quantity: 40 [Op.60] maximum diameter of tool (adjacent) mm: Φ 140 maximum diameter of tool (not adjacent) mm: Φ 240 maximum length of tool mm: 450 maximum weight of tool kg: 25 Tool change time: (T-T) s2.0 tool change time: (C-C) s5.5 (MAS) pallet exchange mode: 2-side rotary pallet exchange time s: 10 power supply kV: A50 common air pressure: mpa0.5 air flow NL / min: 900 positioning accuracy mm: + 0.004/full stroke repeated positioning accuracy mm: + 0.0015 mechanical height mm: 3291 floor area mm: 3480 × 5962 mechanical mass kg: 24000 CNC device: osp-p200m-r